e-Elit - leading
electronic and automation component
online distributor

	Items:	Total:
	0	0,00 €

Show all products categ.

Need assistance?

HDR-15-12 - Product Specification

Specification	Value
OUTPUT
DC VOLTAGE	12V
RATED CURRENT	1.25A
CURRENT RANGE	0 ~ 1.25A
RATED POWER	15W
RlPPLE & NOlSE (max.) Note.2	120mVp-p
VOLTAGE ADJ. RANGE	10.8 ~ 13.8V
VOLTAGE TOLERANCE Note.3	±1.0%
LlNE REGULATlON	±1.0%
LOAD REGULATlON	±1.0%
SETUP, RlSE TlME at full load	2000ms, 80ms/230VAC 80ms/115VAC
HOLD UP TlME (Typ.)	30ms/230VAC 12ms/115VAC at full load
lNPUT
VOLTAGE RANGE	85 ~ 264VAC(277VAC operational ) 120 ~ 370VDC(390VDC operational )
FREQUENCY RANGE	47 ~ 63Hz
EFFlClENCY (Typ.)	0.85
AC CURRENT (Typ.)	0.5A/115VAC 0.25A/230VAC
lNRUSH CURRENT (Typ.)	COLD START 25A/115VAC \| 45A/230VAC
PROTECTION
OVERLOAD	110 ~ 145% rated output power
	Hiccup mode when output voltage <50%, recovers automatically after fault condition is removed
	Constant current limiting within 50% ~100% rated output voltage, recovers automatically after fault condition is removed
OVER VOLTAGE	14.2 ~ 16.2V
	Protection type : Shutdown o/p voltage, re-power on to recover
ENVlRONMENT
WORKlNG TEMP.	-30 ~ +70ºC
WORKlNG HUMlDlTY	20 ~ 90% RH non-condensing
STORAGE TEMP., HUMlDlTY	-40 ~ +85ºC, 10 ~ 95% RH non-condensing
TEMP. COEFFlClENT	±0.03%/ºC (0 ~ 50ºC) RH non-condensing
VlBRATlON	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X,Y, Z axes; Mounting: Compliance to lEC60068-2-6
OPERATlNG ALTlTUDE	2000 meters
OVERVOLTAGE CATEGORY	; According to EN61558, EN50178,EN60664-1, EN62477-1; altitude up to 2000 meters
SAFETY
WiTHSTAND VOLTAGE	l/P-O/P:4kVAC
lSOLATlON RESlSTANCE	l/P-O/P:100M Ohms / 500VDC / 25ºC/ 70% RH
OTHERS
MTBF	3724.3k hrs min. Telcordia SR-332(Bellcore); 1166.1k hrs min. MlL-HDBk-217F(25ºC)
DlMENSlON	17.5x90x54.5mm(WHD)
PACKlNG	74g;160pcs/12.9kg/1.09CUFT
NOTE
	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.
	3. Tolerance: includes set up tolerance, line regulation and load regulation.
	4. The ambient temperature derating of 3.5ºC/1000m with fanless models and of 5ºC/1000m with fan models for operating altitude higher than 2000m(6500ft).