e-Elit - leading
electronic and automation component
online distributor

	Items:	Total:
	0	0,00 €

Show all products categ.

Need assistance?

LED Power Supply 12W 12V IP30

Features
constant voltage design
Universal AC input / Full range
Protections: Short circuit / Over load / Over voltage
Fully isolated plastic case
Cooling by free air convection
Small and compact size
Class II power unit, no FG
Class 2 power unit
Pass LPS
IP30 design
Suitable for LED lighting and moving sign applications
100% full load burn-in test
Low cost, high reliability
2 years warranty

LED strip

OUTPUT DC Voltage	12V
Rated current	1A
Current range	0 ~1A
Rated power	12W
Ripple & Noise (max.) Note.2	120mVp-p
Voltage tolerance Note.3	±5.0%
Line regulation	±1.0%
Load regulation	±2.0%
Setup, rise time Note.6	1500ms, 30ms/ 230VAC 1500ms, 30ms/155VAC at full load
Hold up time (typ.)	20ms/230VAC 15ms/115VAC at full load

INPUT Voltage range Note.4	90 ~ 264VAC 127 ~370VDC
Frequency range	47 ~ 63 Hz
Effiency (typ.)	82%
AC current	0.2A/230VAC 0.35A/115VAC
Inrush current (max.)	cold start 35A/115VAC 70A/230VAC
Leakage current	0.25mA/240VAC

PROTECTION Over load	Above 105% Protection type: Hiccip mode, recovers automatically after fault conditions is removed
Over voltage	13.8 ~ 16V Protection type: Shut off o/p voltage, clamping by zener diode

ENVIRONMENT Working temperature	-30° ~ +70°C (Refer to "Derating Curve")
Working humidity	20 ~ 90% RH non-condensing
Storage temp., humidity	-40 ~ +80°C, 10 ~ 90% RH
Temp. coefficient	±0.03%/°C (0 ~ 50°C)
Vibration	10 ~ 500Hz, 2G 10 min./1 cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC Safety standards	UL8750, CSA C22.2 No.250.0-08 approved, Desing refer to TUV EN60950-1
Withstand voltage	I/P-O/P: 3.75KVAC
Isolation resistance	I/P-O/P: &100M Ohms / 500VDC / 25°C / 70% RH
EMC emission	Compliance to EN55015, EN61000-3-2 Class A, EN61000-3-3
EMC immunity	Compliance to EN61547, EN61000-4-2, 3, 4, 5, 6, 8, 11; light industry level (surge 2KV), criteria A
OTHERS MTBF	1145.7K hrs min. MIL-HDBK-217F (25°C)
Dimension	77 x 40 x 29 (L x W x H)
Packing	0.08kg; 120pcs/11.8kg / 0.93CUFT
NOTE	All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12“ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Tolerance: includes set up tolerance, line regulation and load regulation. Derating may be needed under low input voltage. Please check the static characteristics for more details. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-quality EMC Directive on the complete installation again. Lenght of the set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. The unit might not be suitable for lighting applications in EU countries. please check with your local authorities for the possible use of the unit.