Elit logo e-Elit - leading
electronic and automation component
online distributor
Elit shopping basket
Items: Total:
0
0,00 €
    search
Log in
Username/Email Address:

Password:
Show all products categ.
Need assistance?
Featured Products!
Conduit FFKu-EL-F DN40 320N/5cm, grey
Conduit FFKu-EL-F DN40 320N/5cm, grey



Simatic ET 200SP, ProfiNet Interface Module IM 155-6PN, max. 32 I/O modules, 16 ET 200AL modules, single hot swap, incl. server module (6ES7193-6PA00-0AA0), Siemens
Image is illustrative
Simatic ET 200SP, ProfiNet Interface Module IM 155-6PN, max. 32 I/O modules, 16 ET 200AL modules, single hot swap, incl. server module (6ES7193-6PA00-0AA0), Siemens
Code: 6ES7155-6AU01-0BN0
Cena (indicative)
247,60 €  /pc
Manufacturer :
Availability:
21 days
Weight:
0.2111 kg/pc
Volume:
0.0006 m3/pc
Quantity:
Plus sign Minus sign
 

 

Simatic ET 200SP, ProfiNet Interface Module IM 155-6PN, max. 32 I/O modules, 16 ET 200AL modules, single hot swap, incl. server module (6ES7193-6PA00-0AA0), Siemens

SIMATIC ET 200SP, PROFINET interface module IM 155-6PN Standard, max. 32 I/O modules, and 16 ET 200AL modules, single hot swap, incl. server module (6ES7193-6PA00-0AA0)
General information
Product type designation IM 155-6 PN ST
Firmware version V4.1
Vendor identification (VendorID) 002AH
Device identifier (DeviceID) 0313H
Product function
● I&M data Yes; I&M0 to I&M3
● Module swapping during operation (hot swapping) Yes; Single hot swapping
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version V14
● STEP 7 configurable/integrated as of version V5.5 SP4 and higher
● PROFINET as of GSD version/GSD revision V2.3 / -
Configuration control
via dataset Yes
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Short-circuit protection Yes
Mains buffering
● Mains/voltage failure stored energy time 10 ms
Input current
Current consumption (rated value) 450 mA
Current consumption, max. 550 mA
Inrush current, max. 3.7 A
I²t 0.09 A²·s
Power
Infeed power to the backplane bus 4.5 W
Power loss
Power loss, typ. 1.9 W
Address area
Address space per module
● Address space per module, max. 256 byte; per input / output
Address space per station
● Address space per station, max. 512 byte; Dependent on configuration
Hardware configuration
Rack
● Modules per rack, max. 32; + 16 ET 200AL modules
Submodules
● Number of submodules per station, max. 256
Interfaces
Number of PROFINET interfaces 1; 2 ports (switch)
1. Interface
Interface types
● Number of ports 2
● integrated switch Yes
● BusAdapter (PROFINET) Yes; Applicable BusAdapter: BA 2x RJ45, BA 2x FC
Protocols
● PROFINET IO Device Yes
● Open IE communication Yes
● Media redundancy Yes; PROFINET MRP
Interface types
RJ 45 (Ethernet)
● Transmission procedure PROFINET with 100 Mbit/s full duplex (100BASE-TX)
● 10 Mbps Yes; for Ethernet services
● 100 Mbps Yes; PROFINET with 100 Mbit/s full duplex (100BASE-TX)
● Autonegotiation Yes
● Autocrossing Yes
Protocols
PROFINET IO Device
Services
— Isochronous mode No
— Open IE communication Yes
— IRT Yes; with send cycles of between 250 µs and 4 ms in increments of 125 µs
— PROFIenergy Yes
— Prioritized startup Yes
— Shared device Yes
— Number of IO Controllers with shared device, max. 2
Redundancy mode
● MRP Yes
● MRPD No
● PROFINET system redundancy (S2) No
Open IE communication
● TCP/IP Yes
● SNMP Yes
● LLDP Yes
Isochronous mode
Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Status indicator Yes
Alarms Yes
Diagnostics function Yes
Diagnostics indication LED
● RUN LED Yes; Green LED
● ERROR LED Yes; Red LED
● MAINT LED Yes; yellow LED
● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Connection to network LINK (green) Yes; 2x green link LEDs on BusAdapter
Potential separation
between backplane bus and electronics No
between PROFINET and all other circuits Yes; 1500 V AC
between supply and all other circuits No
Permissible potential difference
between different circuits Safety extra low voltage SELV
Isolation
Isolation tested with 707 V DC (type test)
Standards, approvals, certificates
Network loading class 2
Security level According to Security Level 1 Test Cases V1.1.1
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. 0 °C
● horizontal installation, max. 60 °C
● vertical installation, min. 0 °C
● vertical installation, max. 50 °C
Connection method
ET-Connection
● via BU/BA Send Yes; + 16 ET 200AL modules
Dimensions
Width 50 mm
Height 117 mm
Depth 74 mm
Weights
Weight, approx. 147 g; without BusAdapter
last modified: 11/10/2018
 
 
Elit OÜ | e-post: elit@elit.ee | +372 622 9119 | 2016 ©


 
X
 
X