| LOGO!POWER 24 V / 1.3 A stabilized power supply input: 100-240 V AC output: 24 V / 1.3 A DC |
| Input |
| Input |
1-phase AC or DC |
| Rated voltage value Vin rated |
100 ... 240 V |
| Voltage range AC |
85 ... 264 V |
| Input voltage |
|
| ● at DC |
110 ... 300 V |
| Wide-range input |
Yes |
| Mains buffering at Iout rated, min. |
40 ms; at Vin = 187 V |
| Rated line frequency 1 |
50 Hz |
| Rated line frequency 2 |
60 Hz |
| Rated line range |
47 ... 63 Hz |
| Input current |
|
| ● at rated input voltage 120 V |
0.7 A |
| ● at rated input voltage 230 V |
0.35 A |
| Switch-on current limiting (+25 °C), max. |
25 A |
| I²t, max. |
0.8 A²·s |
| Built-in incoming fuse |
internal |
| Protection in the mains power input (IEC 898) |
Recommended miniature circuit breaker: from 6 A characteristic B or from 2 A characteristic C |
| Output |
| Output |
Controlled, isolated DC voltage |
| Rated voltage Vout DC |
24 V |
| Total tolerance, static ± |
3 % |
| Static mains compensation, approx. |
0.1 % |
| Static load balancing, approx. |
0.1 % |
| Residual ripple peak-peak, max. |
200 mV |
| Residual ripple peak-peak, typ. |
30 mV |
| Spikes peak-peak, max. (bandwidth: 20 MHz) |
300 mV |
| Spikes peak-peak, typ. (bandwidth: 20 MHz) |
50 mV |
| Adjustment range |
22.2 ... 26.4 V |
| Product function Output voltage adjustable |
Yes |
| Output voltage setting |
via potentiometer |
| Status display |
Green LED for output voltage OK |
| On/off behavior |
No overshoot of Vout (soft start) |
| Startup delay, max. |
0.5 s |
| Voltage rise, typ. |
100 ms |
| Rated current value Iout rated |
1.3 A |
| Current range |
0 ... 1.3 A |
| ● Note |
+55 ... +70 °C: Derating 2%/K |
| Supplied active power typical |
31.2 W |
| Parallel switching for enhanced performance |
Yes |
| Numbers of parallel switchable units for enhanced performance |
2 |
| Efficiency |
| Efficiency at Vout rated, Iout rated, approx. |
86 % |
| Power loss at Vout rated, Iout rated, approx. |
5 W |
| Power loss [W] during no-load operation maximum |
0.3 W |
| Closed-loop control |
| Dynamic mains compensation (Vin rated ±15 %), max. |
0.2 % |
| Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. |
1 % |
| Load step setting time 10 to 90%, typ. |
1 ms |
| Load step setting time 90 to 10%, typ. |
1 ms |
| Protection and monitoring |
| Output overvoltage protection |
Yes, according to EN 60950-1 |
| Current limitation, typ. |
1.7 A |
| Property of the output Short-circuit proof |
Yes |
| Short-circuit protection |
Constant current characteristic |
| Enduring short circuit current RMS value |
|
| ● maximum |
1.7 A |
| Overload/short-circuit indicator |
- |
| Safety |
| Primary/secondary isolation |
Yes |
| Galvanic isolation |
Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 |
| Protection class |
Class II (without protective conductor) |
| CE mark |
Yes |
| UL/cUL (CSA) approval |
cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273, NEC class 2 (acc. to UL 1310) |
| Explosion protection |
ATEX (EX) II 3G Ex nA IIC T3; cCSAus (CSA C22.2 No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2, Group ABCD, T4 |
| FM approval |
Class I, Div. 2, Group ABCD, T4 |
| CB approval |
Yes |
| Marine approval |
available soon |
| Degree of protection (EN 60529) |
IP20 |
| EMC |
| Emitted interference |
EN 55022 Class B |
| Supply harmonics limitation |
not applicable |
| Noise immunity |
EN 61000-6-2 |
| Operating data |
| Ambient temperature |
|
| ● during operation |
-25 ... +70 °C |
| — Note |
with natural convection |
| ● during transport |
-40 ... +85 °C |
| ● during storage |
-40 ... +85 °C |
| Humidity class according to EN 60721 |
Climate class 3K3, no condensation |
| Mechanics |
| Connection technology |
screw-type terminals |
| Connections |
|
| ● Supply input |
L, N: 1 screw terminal each for 0.5 ... 2.5 mm2 single-core/finely stranded |
| ● Output |
+, -: 2 screw terminals each for 0.5 ... 2.5 mm² |
| ● Auxiliary |
- |
| Width of the enclosure |
36 mm |
| Height of the enclosure |
90 mm |
| Depth of the enclosure |
53 mm |
| Required spacing |
|
| ● top |
20 mm |
| ● bottom |
20 mm |
| ● left |
0 mm |
| ● right |
0 mm |
| Weight, approx. |
0.12 kg |
| Product feature of the enclosure housing for side-by-side mounting |
Yes |
| Installation |
Snaps onto DIN rail EN 60715 35x15, various direct mounting positions |
| MTBF at 40 °C |
3 094 996 h |
| Other information |
Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
|
|
