Guard Locking Switch Guardmaster Centurion, BBM action, 2NC safety, 1NO aux., 2A 250V, -25..80°C die-cast alloy, 2x M20, IP66, Allen-Bradley, red

Guardmaster® Centurion® Guard Locking Switch, Type: Right Hand, Voltage Rating: 500 V Insulation, Amperage Rating: 1 A At 500 V, 2 A At 250 V, 5 A At 100 V, Contact Configuration: 2NC Safety, 1NO Auxiliary, Contact Rating: 1 A At 500 V, 2 A At 250 V, 5 A At 100 V, Actuator: Standard, Action: BBM, Material: Die-Cast Alloy Case, Stainless Steel Locking shaft, Color: Red, Thermal Current: 10 A, Switching Current: 5 MA At 5 VDC, Connection: 2 X M20 Conduit, Size: 5.08 IN Height X 1.59 IN Width X 3.86 IN Depth, Enclosure: IP66, Operating Cycles: 1000000, Temperature Rating: -25 To 80 DEG C, Safety Contact Gap: Greater Than 2 MM, Rated Impulse Withstand Voltage: 2500 V, Maximum Switched Current/Volt/Load: 500 V/500 VA

• Item Name: Guard Locking Switch

• Type: Right Hand

• Sub Brand: Guardmaster®, Centurion®

• Voltage Rating: 500 V Insulation

• Amperage Rating: 1 A At 500 V, 2 A At 250 V, 5 A At 100 V

• Contact Configuration: 2NC Safety, 1NO Auxiliary

• Contact Rating: 1 A At 500 V, 2 A At 250 V, 5 A At 100 V

• Actuator: Standard

• Action: BBM

• Material: Die-Cast Alloy Case, Stainless Steel Locking shaft

• Color: Red

• Thermal Current: 10 A

• Switching Current: 5 MA At 5 VDC

• Connection: 2 X M20 Conduit

• Size: 5.08 IN Height X 1.59 IN Width X 3.86 IN Depth

• Enclosure: IP66

• Operating Cycles: 1000000

• Temperature Rating: -25 To 80 DEG C

• Safety Contact Gap: Greater Than 2 MM

• Rated Impulse Withstand Voltage: 2500 V

• Maximum Switched Current/Volt/Load: 500 V/500 VA

The Centurion is a positive mode, thumbwheel operated machine guard locking interlock switch that locks the guard closed until the operator manually rotates the thumbwheel, retracting the shaft from the guard door. The action of retracting the shaft initiates two functions; it isolates the power to the machine while the guard is open and, due to the operating principle, gives up to 20 seconds delay before the guard can be opened.

• 2 MM shaft movement to achieve contact operation
• Manually operated time delay, allows for machine run down
• Simple operation and installation
• Ideal for heavy duty applications
• Standards: EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC/EN60947-5-1, ANSI B11.19, AS4024.1, CE marked for all applicable directives, cULus, BG, and SUVA