Guard Locking Switch Gardmaster TLS-1 GD2, contact 3NC+2NC 3A 240V AC15, power-to-release, PBT ?sst, -20..60°C, 24VAC/DC, M20, IP69K, Allen-Bradley

Guardmaster® Guard Locking Switch, Type: TLS-1 GD2 Model, Voltage Rating: 24 VAC/VDC Solenoid, Contact Configuration: 2NC Safety, 1NO Auxiliary, 1NC 1NO Solenoid, Contact Rating: A600/AC-15: 1.2 A At 600 V, 1.4 A At 500 V, 3 A At 240 V, 6 A At 120 V, DC-13: 2 A At 24 V, Action: BBM, Actuation Speed: 6.29 IN/SEC, Lock Type: Power-To-Release, Material: Glass-Filled PBT Housing, Stainless Steel Actuator, Color: Red, Thermal Current: 10 A, Switching Current: 3 MA At 18 VDC, Wattage: 7 W Solenoid, Load Rating: 50 N Maximum Releasable, Connection: M20 Conduit, Enclosure: IP66, IP67, IP69K, Operating Cycles: 1000000 Minimum, Temperature Rating: -20 To 60 DEG C

• Item Name: Guard Locking Switch

• Type: TLS-1 GD2 Model

• Sub Brand: Guardmaster®

• Voltage Rating: 24 VAC/VDC Solenoid

• Contact Configuration: 2NC Safety, 1NO Auxiliary, 1NC 1NO Solenoid

• Contact Rating: A600/AC-15: 1.2 A At 600 V, 1.4 A At 500 V, 3 A At 240 V, 6 A At 120 V, DC-13: 2 A At 24 V

• Action: BBM

• Actuation Speed: 6.29 IN/SEC

• Lock Type: Power-To-Release

• Material: Glass-Filled PBT Housing, Stainless Steel Actuator

• Color: Red

• Thermal Current: 10 A

• Switching Current: 3 MA At 18 VDC

• Wattage: 7 W Solenoid

• Load Rating: 50 N Maximum Releasable

• Connection: M20 Conduit

• Enclosure: IP66, IP67, IP69K

• Operating Cycles: 1000000 Minimum

• Temperature Rating: -20 To 60 DEG C

The TLS-GD2 is a positive mode, tongue operated guard locking interlock switch that locks a machine guard closed until power is isolated and ensures that it remains isolated while the guard is open. It has three safety (N.C.) contacts and two auxiliary (N.O.) contacts. The TLS-GD2 head has two entry slots and it can be rotated to provide four actuator entry points. A blanking plug is provided to seat the unused slot. The guard may only be opened when a signal is applied to the TLSGD2's internal solenoid which releases the lock mechanism. This signal can be via CU1 electronic timer relays or CU2 stopped motion detectors. Therefore the TLS-GD2 is ideal for machines which do not stop immediately or where premature interruption of the machine could cause damage to tooling and components or cause an additional hazard. The TLS-GD2 is available in three types. The TLS-1 GD2 and TLS-3 GD2 incorporate a power-to-release function. Two manual release points with security screws allow the locked TLS-GD2 to be released in emergencies. An optional lid-mounted key-release style can also be supplied. The TLS-2 GD2 has a power-to-lock function. Each type of switch has five sets of contacts of various forms and are suitable for use with PLCs. The TLS-1 GD2 and TLS-3 GD2 are both available with escape release options. They are intended for machine guarding with full body access. The switch is installed so that the escape release push button on the rear side is accessible from inside the hazardous area. This allows the intentional unlocking of the TLS-GD2 from inside a hazardous area, providing a means of escape for a person who may become trapped. A stainless-steel actuator guide is fitted to protect the unit from actuator damage due to poor guard alignment or guard wear. TLS-GD2 has an ingress protection rating of IP69K making it suitable for harsh washdown applications as found in the food and beverage, pharmaceutical, solar and semiconductor industries.

• Power-to-release or power-to-lock
• High locking force £2000 N (450 LB)
• Five contacts: 2 N.C and 1 N.O for door position monitoring 1 N.C and 1 N.O or 2 N.C for lock monitoring
• Rotatable head: 4 possible key entry slots
• Conforms to EN 1088 and EN 60947-5-1
• Escape release version available
• IP69K, suitable for high pressure, high temperature washdown
• Standards: EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC/EN60947-5-1, ANSI B11.19, AS4024.1, CE marked for all applicable directives, C/US UL listed, TUV, and CCC certified