HART Analog Input Module Flex™, 8-ch., input 0/4..20mA, 0.320µA/CNT, panel mount ?TS35, 190mA 24VDC, Allen-Bradley

Flex™ I/O Hart Analog Input Module, Number Of Channels: 8 (Isolated), Input: Input Current Terminal: 4 - 20 MA (User Configurable), 0 - 20 MA (User Configurable), Voltage Rating: External Power: 24 VDC, External DC Power Supply Range: 19.2 - 31.2 VDC, Current Rating: 0.320 MICRO-A/CNT Unipolar, 0.640 MICRO-A/CNT Bipolar, External DC Power Supply Current: 190 MA At 24 VDC, Isolation: 120 V (Continuous), Basic Insulation Type, Tested At 1000 VAC For 60 SEC, Between User Power To System, Channel To System, And Channel To Channel, Enclosure: Open Type, Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2000 MHZ, 10 V/M With 200 Hz 50% Pulse 100% AM At 900 MHZ, 10 V/M With 200 Hz 50% Pulse 100% AM At 1890 MHZ, 3 V/M With 1 KHZ Sine-Wave 80% AM From 2000 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 80 MHZ, Mounting: DIN Rail, Panel, Length: 3.7 IN, Width: 2.6 IN, Height: 3.7 IN, Temperature Rating: 32 - 131 DEG F, Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing), Vibration Operating: 5 G At 10 - 500 HZ, Shock - Operating: 20 G, Non-Operating: 25 G, Accuracy: Absolute Accuracy: 0.1% Full Scale At 25 DEG C, Accuracy Drift With Temperature: 0.4% Full Scale For 0 - 55 DEG C, Power Dissipation: 4.8 W At 31.2 VDC, Bus Rating: Flexbus Current External Input: 5 VDC 80 MA, 24 VDC 190 MA, Flexbus Current: 80 MA, Input Step Response: Step Response To 99% - Current Terminal: 4.17 HZ Conversion Rate = 480 MS, 10 HZ Conversion Rate = 200 MS, 16.7 HZ Conversion Rate = 120 MS, 19.6 HZ Conversion Rate = 101 MS, 62 HZ Conversion Rate = 32 MS, 470 HZ Conversion Rate = 4 MS, Indicator: 1 Red/Green Power/Status Indicator, Resistance: Input Resistance: 249 OHM Plus/Minus 1%, Rejection Ratio: Normal Mode Rejection Ratio - Current Terminal: Greater Than 70 DB At 50/60 HZ (4.17 HZ ADC Conversion Rate), Greater Than 65 DB At 50/60 HZ (10 HZ ADC Conversion Rate), Greater Than 75 DB At 50 HZ (16.7 HZ ADC Conversion Rate), Greater Than 85 DB At 60 HZ (19.6 HZ ADC Conversion Rate), Common Mode Rejection Ratio: Greater Than 60 DB At 50 HZ, Greater Than 60 DB At 60 HZ, Resolution: 16 Bits - Unipolar, 15 Bits Plus Sign - Bipolar, Surge Transient Immunity: Plus/Minus 2 KV line-earth(CM) On Shielded Ports, Keyswitch Position: 3, Standard/Approvals: C/US UL listed, CE-ATEX, CE-EMC, CE-LVD, C-tick, GOST_R, KCC certified, ROSTECHNADZOR, RUS_PAT_APPR, Application: For in-cabinets

• Item Name: Hart Analog Input Module

• Sub Brand: Flex™ I/O

• Number Of Channels: 8 (Isolated)

• Input: Input Current Terminal: 4 - 20 MA (User Configurable), 0 - 20 MA (User Configurable)

• Voltage Rating: External Power: 24 VDC, External DC Power Supply Range: 19.2 - 31.2 VDC

• Current Rating: 0.320 MICRO-A/CNT Unipolar, 0.640 MICRO-A/CNT Bipolar, External DC Power Supply Current: 190 MA At 24 VDC

• Isolation: 120 V (Continuous), Basic Insulation Type, Tested At 1000 VAC For 60 SEC, Between User Power To System, Channel To System, And Channel To Channel

• Enclosure: Open Type

• Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2000 MHZ, 10 V/M With 200 Hz 50% Pulse 100% AM At 900 MHZ, 10 V/M With 200 Hz 50% Pulse 100% AM At 1890 MHZ, 3 V/M With 1 KHZ Sine-Wave 80% AM From 2000 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 80 MHZ

• Mounting: DIN Rail, Panel

• Length: 3.7 IN

• Width: 2.6 IN

• Height: 3.7 IN

• Temperature Rating: 32 - 131 DEG F

• Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing), Vibration Operating: 5 G At 10 - 500 HZ, Shock - Operating: 20 G, Non-Operating: 25 G

• Accuracy: Absolute Accuracy: 0.1% Full Scale At 25 DEG C, Accuracy Drift With Temperature: 0.4% Full Scale For 0 - 55 DEG C

• Power Dissipation: 4.8 W At 31.2 VDC

• Indicator: 1 Red/Green Power/Status Indicator

• Surge Transient Immunity: Plus/Minus 2 KV line-earth(CM) On Shielded Ports

• Resolution: 16 Bits - Unipolar, 15 Bits Plus Sign - Bipolar

• Keyswitch Position: 3

• Bus Rating: Flexbus Current External Input: 5 VDC 80 MA, 24 VDC 190 MA, Flexbus Current: 80 MA

• Resistance: Input Resistance: 249 OHM Plus/Minus 1%

• Input Step Response: Step Response To 99% - Current Terminal: 4.17 HZ Conversion Rate = 480 MS, 10 HZ Conversion Rate = 200 MS, 16.7 HZ Conversion Rate = 120 MS, 19.6 HZ Conversion Rate = 101 MS, 62 HZ Conversion Rate = 32 MS, 470 HZ Conversion Rate = 4 MS

• Rejection Ratio: Normal Mode Rejection Ratio - Current Terminal: Greater Than 70 DB At 50/60 HZ (4.17 HZ ADC Conversion Rate), Greater Than 65 DB At 50/60 HZ (10 HZ ADC Conversion Rate), Greater Than 75 DB At 50 HZ (16.7 HZ ADC Conversion Rate), Greater Than 85 DB At 60 HZ (19.6 HZ ADC Conversion Rate), Common Mode Rejection Ratio: Greater Than 60 DB At 50 HZ, Greater Than 60 DB At 60 HZ

FLEX I/O offers all the functions of larger rack-based I/O without the space requirements. Its cost effectiveness, flexibility, modularity, and reliability. FLEX I/O helps eliminate multiple long wiring runs, reduces terminations per point, decreases engineering and installation costs and time, and substantially reduces downtime. It complements all processor platforms. Can communicate on EtherNet/IP, ControlNet, DeviceNet, and PROFIBUS DP. Independently select the I/O, termination style, and network to meet your application needs. Conformally coated, extreme environment FLEX I/O products help to reduce panel costs and the need for additional heating/cooling equipment, resulting in lower installation and maintenance costs.

• Reduced space - wire direct from sensor to terminal base and eliminate terminal strip
• Functionality: 4- through 32-point modules offer functions of larger rack-based I/O
• Increased productivity: easy configuration and setup of I/O modules using wizards speeds engineering and installation
• Reduced downtime: removal and insertion under power (RIUP) and diagnostics
• Operation in harsh environments: conformal coated and extreme environment rated modules
• Network flexibility: communicates on EtherNet/IP, ControlNet, DeviceNet, and PROFIBUS DP
• Improved plant operations: HART analog modules pass through HART data to asset management software or controller for improved plant operations
• Standards: C/US UL listed, CE-ATEX, CE-EMC, CE-LVD, C-tick, GOST_R, KCC certified, ROSTECHNADZOR, RUS_PAT_APPR
• Applications: For in-cabinets