Digital DC I/O Module CompactLogix, 32-ch., current sourcing, 24VDC, 220mA 5.1V drawn, TS35?panel mount, Allen-Bradley

CompactLogix™ Digital DC I/O Module, Number Of Channels: 32 (16 Points/Group), Output: Operating Voltage: 10.2 - 26.4 VDC, Off-State Leakage Current: 0.1 MA At 26.4 VDC (Maximum), On-State Current: 1 MA (Minimum), On-State Voltage Drop: 0.3 VDC At 0.5 A (Maximum), Voltage Rating: 24 VDC, Current Rating: Drawn: 220 MA At 5.1 V, Current Per Point: 0.5 A (Maximum), Current Per Module: 4.0 A (Maximum), Isolation: 1200 VAC For 2 SEC Or 1697 VDC For 2 SEC, Output Point To Bus, 75 VDC Working Voltage, Enclosure: Open Type, Display: Status LED, Connection Cables: 22 - 14 AWG Solid, 22 - 16 AWG Stranded, Mounting: DIN Rail, Panel, Length: 1.38 IN, Width: 3.43 IN, Height: 4.65 IN, Temperature Rating: 32 - 140 DEG F, Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Vibration: 5 G At 10 - 500 HZ (Operating), Shock - Panel Mount: 30 G (Operating), 40 G (Non-Operating), DIN Rail Mount: 20 G (Operating), 30 G (Non-Operating), Response Time: Delay (On): 0.5 MS, Delay (Off): 4 MS, Power Dissipation: 4.76 W, Output Type: Current Sourcing, Slot Width: 1, Surge Current: 2 A For 10 MS, Repeatable Every 2 SEC, Standard/Approvals: C/US UL listed, UL 508 listed, CSA C22.2, file number 142, GOST_R certified, KCC certified, MARINE-ABS certified, MARINE-BVS certified, MARINE-DNV certified, MARINE-GL certified, MARINE-LR certified, ROSTECHNADZOR

• Item Name: Digital DC I/O Module

• Sub Brand: CompactLogix™

• Number Of Channels: 32 (16 Points/Group)

• Output: Operating Voltage: 10.2 - 26.4 VDC, Off-State Leakage Current: 0.1 MA At 26.4 VDC (Maximum), On-State Current: 1 MA (Minimum), On-State Voltage Drop: 0.3 VDC At 0.5 A (Maximum)

• Voltage Rating: 24 VDC

• Current Rating: Drawn: 220 MA At 5.1 V, Current Per Point: 0.5 A (Maximum), Current Per Module: 4.0 A (Maximum)

• Isolation: 1200 VAC For 2 SEC Or 1697 VDC For 2 SEC, Output Point To Bus, 75 VDC Working Voltage

• Enclosure: Open Type

• Display: Status LED

• Connection Cables: 22 - 14 AWG Solid, 22 - 16 AWG Stranded

• Mounting: DIN Rail, Panel

• Length: 1.38 IN

• Width: 3.43 IN

• Height: 4.65 IN

• Temperature Rating: 32 - 140 DEG F

• Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Vibration: 5 G At 10 - 500 HZ (Operating), Shock - Panel Mount: 30 G (Operating), 40 G (Non-Operating), DIN Rail Mount: 20 G (Operating), 30 G (Non-Operating)

• Response Time: Delay (On): 0.5 MS, Delay (Off): 4 MS

• Power Dissipation: 4.76 W

• Output Type: Current Sourcing

• Surge Current: 2 A For 10 MS, Repeatable Every 2 SEC

• Slot Width: 1

Most output modules have built-in surge suppression to reduce the effects of high-voltage transients. Use an additional suppression device if an output is being used to control inductive devices, such as relays, motor starters, solenoids, or motors. Additional suppression is especially important if your inductive device is in series with or parallel to hard contacts, such as push buttons or selector switches. Add a suppression device directly across the coil of an inductive device to reduce the effects of voltage transients caused by interrupting the current to that device and to prolong the life of the switch contacts.

• Logic circuits determine the output status
• An output LED indicates the status of the output signal
• Optical isolation separates module logic and bus circuits from field power
• The output driver turns the corresponding output on or off
• Standards: C/US UL listed, UL 508 listed, CSA C22.2, file number 142, GOST_R certified, KCC certified, MARINE-ABS certified, MARINE-BVS certified, MARINE-DNV certified, MARINE-GL certified, MARINE-LR certified, ROSTECHNADZOR