e-Elit - leading
electronic and automation component
online distributor

	Items:	Total:
	0	0,00 €

Show all products categ.

Need assistance?

Digital Input Module MicroLogix, 32-ch., 24VDC sink/source, TS35˄panelt mount, Allen-Bradley

MicroLogix™ Digital Input Module, Type: Discrete, Number Of Channels: 32 (Isolated), Input: On-State Voltage: 10 VDC, Off-State Voltage: 5 VDC, Off-State Current: 1 MA, On-State Current: 1.6 MA At 10 VDC, 2 MA At 15 VDC, On-State Current: 5.7 MA At 26.4 VDC, 6.5 MA At 30 VDC, Voltage Rating: 10 - 26.4/10 - 30 VDC, Isolation: Verified By One Of The Following Dielectric Tests: 1200 VAC For 2 SEC Or 1697 VDC For 2 SEC, 75 VDC Working Voltage (IEC Class 2 Reinforced Insulation), Enclosure: IP20, Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 80 MHZ, Connection Cables: 22 AWG, 24 AWG, 26 AWG Solid/Stranded Copper Wire, Mounting: DIN Rail, Panel, Length: 1.59 IN, Width: 3.425 IN, Height: 3.543 IN, Temperature Rating: -4 To 140 DEG F, Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing), Vibration: 5 G, Shock - Operating: 30 G, Non-Operating: 50 G (Panel Mount), 40 G (DIN Mount), Response Time: Signal Delay - On Delay: 8 MS, Off Delay: 8 MS, Output Type: Current Sinking/Source, Impedance: Nominal: 4.7 KOHM, Surge Transient Immunity: Plus/Minus 1 KV Line-Line(DM) And Plus/Minus 2 KV Line-Earth(CM) On Signal Ports, Bus Rating: Bus Current Draw: 170 MA At 5 VDC, Indicator: LED, Standard/Approvals: C/US UL listed, UL 508, UL 1604, CSA C22.2, file number 213, CE marked, class I, division 2, hazardous location, groups A, B, C, D, C-tick, GOST_R, KCC certified, ROSTECHNADZOR

Specifications

Item Name: Digital Input Module
Type: Discrete
Sub Brand: MicroLogix™
Number Of Channels: 32 (Isolated)
Input: On-State Voltage: 10 VDC, Off-State Voltage: 5 VDC, Off-State Current: 1 MA, On-State Current: 1.6 MA At 10 VDC, 2 MA At 15 VDC, On-State Current: 5.7 MA At 26.4 VDC, 6.5 MA At 30 VDC
Voltage Rating: 10 - 26.4/10 - 30 VDC
Isolation: Verified By One Of The Following Dielectric Tests: 1200 VAC For 2 SEC Or 1697 VDC For 2 SEC, 75 VDC Working Voltage (IEC Class 2 Reinforced Insulation)
Enclosure: IP20
Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 80 MHZ
Connection Cables: 22 AWG, 24 AWG, 26 AWG Solid/Stranded Copper Wire
Mounting: DIN Rail, Panel
Length: 1.59 IN
Width: 3.425 IN
Height: 3.543 IN
Temperature Rating: -4 To 140 DEG F
Environmental Conditions: Relative Humidity: 5 - 95% (Non-Condensing), Vibration: 5 G, Shock - Operating: 30 G, Non-Operating: 50 G (Panel Mount), 40 G (DIN Mount)
Response Time: Signal Delay - On Delay: 8 MS, Off Delay: 8 MS
Output Type: Current Sinking/Source
Indicator: LED
Surge Transient Immunity: Plus/Minus 1 KV Line-Line(DM) And Plus/Minus 2 KV Line-Earth(CM) On Signal Ports
Impedance: Nominal: 4.7 KOHM
Bus Rating: Bus Current Draw: 170 MA At 5 VDC

Features
The 1762 MicroLogix expansion I/O modules are compatible with MicroLogix 1100, MicroLogix 1200, and MicroLogix 1400 controllers. Install the expansion I/O modules to the right of the controller, either on a panel with two mounting screws or on a DIN rail. Use digital I/O modules in many combinations, up to the maximum supported by the controller. The current loading capacity of the controller’s built-in power supply may limit the actual number of I/O modules that can be connected to the controller.
Integrated high-performance I/O bus
Software keying to prevent incorrect positioning within the system
Finger-safe terminal blocks for I/O wiring
Label to record I/O terminal designations
Network support includes EtherNet/IP, DeviceNet, and DH-485 (local only)
Standards: C/US UL listed, UL 508, UL 1604, CSA C22.2, file number 213, CE marked, class I, division 2, hazardous location, groups A, B, C, D, C-tick, GOST_R, KCC certified, ROSTECHNADZOR