|
|
Image is illustrative
|
Analog Input Module ControlLogix, 8-ch., 30VDC, 300mA 5V drawn, Allen-Bradley Code:
1756-IF8H
Cena (indicative)
Manufacturer
:
Availability:
ask for dd
|
Weight:
0.415 kg/pc
|
Volume:
0.0024 m3/pc
|
|
|
|
|
Analog Input Module ControlLogix, 8-ch., 30VDC, Drawn 300mA 5V, Allen-Bradley
ControlLogix® Analog Input Module, Number Of Channels: 8 (Differential Voltage Or Current), Input: Plus/Minus 10 V, 0 - 5 V, 1 - 5 V, 0 - 10 V, 0 - 20 MA, 4 - 20 MA, Voltage Rating: Overvoltage Protection Voltage: 30 VDC, Overvoltage Protection Current: 8 VDC, Current Rating: Drawn: 300 MA At 5 V, 135 MA At 24 V, Isolation: 50 V (Continuous), Basic Insulation Type, Input Channels-To-Backplane, And Input Channel-To-Channel, Type Tested At 1500 VAC For 60 SEC, Power Rating: Backplane: 4.77 W, Enclosure: Open Type, Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2000 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 900 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 1890 MHZ, 1 V/M With 1 KHZ Sine-Wave 80% AM From 2000 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 80 MHZ On Shielded Signal Ports, Display: Module Health, In Calibration Mode, Interface: Removable Terminal Block, IEEE, Mounting: Chassis, Temperature Rating: 32 - 140 DEG F, Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Vibration: 2 G At 10 - 500 HZ , Shock: 30 G(Operating), 50 G (Non-Operating), Response Time: Open Circuit Detection Time: Positive Full Scale Reading Within 5 SEC, Module Input Scan Time: 18 - 488 MS, Module HART Scan Time: Typically 1 SEC Per HART Channel Enabled, Estimate 10 SEC If All 8 Channels Have HART Enabled, Pass Through Messages, Handheld Communicators, Secondary Masters, Communication Errors, Or Configuration Changes Can Significantly Increase The Update Time, Accuracy: Calibrated - Voltage: Better Than 0.05% Of Range, Current: Better Than 0.15% Of Range, Power Dissipation: Voltage: 3.21 W, Current: 4.01 W, Slot Width: 1, Surge Transient Immunity: Plus/Minus 2 KV Line-Earth (CM) On Shielded Signal Ports, Impedance: Input - Voltage: Greater Than 1 MOHM, Current: 250 OHM, Rejection Ratio: Normal Mode Noise Rejection: Greater Than 80 DB At 50/60 HZ, Common Mode Noise Rejection: Greater Than 100 DB At 50/60 HZ, Resolution: 16 - 21 Bits, Standard/Approvals: C/US UL listed, CE-ATEX, CE-EMC, C-TICK, GOST_R, KCC certified, MARINE-ABS, MARINE-BVS, MARINE-DNV, MARINE-GL, MARINE-KRS, MARINE-LR, ROSTECHNADZOR, RUS_PAT_APPR, TUV-FS
|
|
Specifications
- Item Name: Analog Input Module
- Sub Brand: ControlLogix®
- Number Of Channels: 8 (Differential Voltage Or Current)
- Input: Plus/Minus 10 V, 0 - 5 V, 1 - 5 V, 0 - 10 V, 0 - 20 MA, 4 - 20 MA
- Voltage Rating: Overvoltage Protection Voltage: 30 VDC, Overvoltage Protection Current: 8 VDC
- Current Rating: Drawn: 300 MA At 5 V, 135 MA At 24 V
- Isolation: 50 V (Continuous), Basic Insulation Type, Input Channels-To-Backplane, And Input Channel-To-Channel, Type Tested At 1500 VAC For 60 SEC
- Power Rating: Backplane: 4.77 W
- Enclosure: Open Type
- Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2000 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 900 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 1890 MHZ, 1 V/M With 1 KHZ Sine-Wave 80% AM From 2000 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 80 MHZ On Shielded Signal Ports
- Display: Module Health, In Calibration Mode
- Interface: Removable Terminal Block, IEEE
- Mounting: Chassis
- Temperature Rating: 32 - 140 DEG F
- Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Vibration: 2 G At 10 - 500 HZ , Shock: 30 G(Operating), 50 G (Non-Operating)
- Response Time: Open Circuit Detection Time: Positive Full Scale Reading Within 5 SEC, Module Input Scan Time: 18 - 488 MS, Module HART Scan Time: Typically 1 SEC Per HART Channel Enabled, Estimate 10 SEC If All 8 Channels Have HART Enabled, Pass Through Messages, Handheld Communicators, Secondary Masters, Communication Errors, Or Configuration Changes Can Significantly Increase The Update Time
- Accuracy: Calibrated - Voltage: Better Than 0.05% Of Range, Current: Better Than 0.15% Of Range
- Power Dissipation: Voltage: 3.21 W, Current: 4.01 W
- Surge Transient Immunity: Plus/Minus 2 KV Line-Earth (CM) On Shielded Signal Ports
- Resolution: 16 - 21 Bits
- Impedance: Input - Voltage: Greater Than 1 MOHM, Current: 250 OHM
- Rejection Ratio: Normal Mode Noise Rejection: Greater Than 80 DB At 50/60 HZ, Common Mode Noise Rejection: Greater Than 100 DB At 50/60 HZ
- Slot Width: 1
Features
Increased accuracy, repeatability and stability over entire temperature operating ranges
No field calibration requirement
Increased precision with 24 bits of usable resolution
CIPSynch-enabled, allowing timestamping in PTP
Synchronized input sampling across all modules anywhere in a CIPSynch system
Fast (1 MS) input sampling of floating point values and faster output response times
Per channel status and fault LED annunciation
Standards: C/US UL listed, CE-ATEX, CE-EMC, C-TICK, GOST_R, KCC certified, MARINE-ABS, MARINE-BVS, MARINE-DNV, MARINE-GL, MARINE-KRS, MARINE-LR, ROSTECHNADZOR, RUS_PAT_APPR, TUV-FS
|
|
|
|