e-Elit - leading
electronic and automation component
online distributor

	Items:	Total:
	0	0,00 €

Show all products categ.

Need assistance?

Fast Analogue Module ControlLogix, 4HS Current-Voltage Inputs, 2HS Current-Voltage Outputs (36pin), Allen-Bradley

ControlLogix® Analog Combination I/O Module, Number Of Channels: 4 (High-Speed, Sub-Millisecond, Differential), 2 (High-Speed Voltage Or Current), Input: Plus/Minus 10.5 V, 0 - 10.5 V, 0 - 5.25 V, 0 - 21 MA, Output: Plus/Minus 10.4 V, 0 - 21 MA, Voltage Rating: Overvoltage Protection: 30 VDC, Current: 8 VAC/VDC/Overvoltage Protection: 24 VDC, Current Rating: Drawn: 375 MA At 5 V, 100 MA At 24 V, Isolation: 250 V (Continuous), Basic Insulation Type, Inputs And Outputs To Backplane, No Isolation Between Individual Inputs Or Outputs, 1350 VAC For 2 SEC Routine Test, Power Rating: Backplane: 4.3 W, Enclosure: Open Type, Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2000 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 900 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 1890 MHZ, 1 V/M With 1 KHZ Sine-Wave 80% AM From 2000 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 80 MHZ On Shielded Signal Ports, Display: Module Health, In Calibration Mode, Interface: Removable Terminal Block, Mounting: Chassis, Temperature Rating: 32 - 140 DEG F, Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Vibration: 2 G At 10 - 500 HZ , Shock: 30 G(Operating), 50 G (Non-Operating), Response Time: Open Circuit Detection Time: Positive Full Scale Reading Within 1 SEC, Module Input Scan Time: 300 MIC-SEC Minimum, Accuracy: Calibrated: 0.05% Of Range Immediately After Calibration, Better Than 0.1% Of Range Within Calibration Interval At 25 DEG C, Power Dissipation: Voltage: 4.3 W, Current: 4.7 W, Slot Width: 1, Resolution: Approximately 14 Bits Across Plus/Minus 10.5 VDC (21 V Total), Plus/Minus 10.5 V Range: 1.3 MV/Bit, 14-Bit Effective, 0 - 10.5 V Range: 1.3 MV/Bit, 13-Bit Effective, 0 - 5.25 V Range: 1.3 MV/Bit, 12-Bit Effective, Approximately 12 Bits Across 21 MA, 0 - 21 MA Range: 5.25 MICRO-A/Bit/13 Bits Across 21 MA Equal To 2.8 MICRO-A/Bit, 14 Bits Across 21.8 V Equal To 1.3 MV/Bit, Surge Transient Immunity: Plus/Minus 2 KV Line-Earth (CM) On Shielded Signal Ports, Impedance: Input - Voltage: Greater Than 1 MOHM, Current: 249 OHM, Standard/Approvals: C/US UL listed, CSA certified, CE-ATEX, CE-EMC, CE-LVD, C-TICK, FM-US_HAZ, GOST_R, KCC certified, MARINE-ABS, MARINE-BVS, MARINE-DNV, MARINE-GL, MARINE-KRS, MARINE-LR, ROSTECHNADZOR, RUS_PAT_APPR

Specifications

Item Name: Analog Combination I/O Module
Sub Brand: ControlLogix®
Number Of Channels: 4 (High-Speed, Sub-Millisecond, Differential), 2 (High-Speed Voltage Or Current)
Input: Plus/Minus 10.5 V, 0 - 10.5 V, 0 - 5.25 V, 0 - 21 MA
Output: Plus/Minus 10.4 V, 0 - 21 MA
Voltage Rating: Overvoltage Protection: 30 VDC, Current: 8 VAC/VDC/Overvoltage Protection: 24 VDC
Current Rating: Drawn: 375 MA At 5 V, 100 MA At 24 V
Isolation: 250 V (Continuous), Basic Insulation Type, Inputs And Outputs To Backplane, No Isolation Between Individual Inputs Or Outputs, 1350 VAC For 2 SEC Routine Test
Power Rating: Backplane: 4.3 W
Enclosure: Open Type
Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2000 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 900 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 1890 MHZ, 1 V/M With 1 KHZ Sine-Wave 80% AM From 2000 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 80 MHZ On Shielded Signal Ports
Display: Module Health, In Calibration Mode
Interface: Removable Terminal Block
Mounting: Chassis
Temperature Rating: 32 - 140 DEG F
Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Vibration: 2 G At 10 - 500 HZ , Shock: 30 G(Operating), 50 G (Non-Operating)
Response Time: Open Circuit Detection Time: Positive Full Scale Reading Within 1 SEC, Module Input Scan Time: 300 MIC-SEC Minimum
Accuracy: Calibrated: 0.05% Of Range Immediately After Calibration, Better Than 0.1% Of Range Within Calibration Interval At 25 DEG C
Power Dissipation: Voltage: 4.3 W, Current: 4.7 W
Surge Transient Immunity: Plus/Minus 2 KV Line-Earth (CM) On Shielded Signal Ports
Resolution: Approximately 14 Bits Across Plus/Minus 10.5 VDC (21 V Total), Plus/Minus 10.5 V Range: 1.3 MV/Bit, 14-Bit Effective, 0 - 10.5 V Range: 1.3 MV/Bit, 13-Bit Effective, 0 - 5.25 V Range: 1.3 MV/Bit, 12-Bit Effective, Approximately 12 Bits Across 21 MA, 0 - 21 MA Range: 5.25 MICRO-A/Bit/13 Bits Across 21 MA Equal To 2.8 MICRO-A/Bit, 14 Bits Across 21.8 V Equal To 1.3 MV/Bit
Impedance: Input - Voltage: Greater Than 1 MOHM, Current: 249 OHM
Slot Width: 1

Features
HART interface
Standards: C/US UL listed, CE-ATEX marked, CE-EMC marked, C-TICK certified, GOST_R certified, KCC certified, ROSTECHNADZOR