Digital DC Input Module ControlLogix, 16-ch., 24/48VDC, 320mA 5.1V drawn, Allen-Bradley

ControlLogix® Digital DC Input Module, Number Of Channels: 16 (Isolated), Input: Operating Voltage: 10 - 55 VDC, Nominal: 24 VDC, Off-State Voltage: 5 V, Off-State Current: 1.5 MA, On-State Current: 2 MA At 9 VDC, On-State Current: 4.5 MA At 24 - 31 VDC, On-State Current: 5.1 MA At 48 - 55 VDC, Voltage Rating: 24/48 VDC, Current Rating: Drawn: 320 MA At 5.1 V, 2 MA At 24 V, Isolation: 250 V (Continuous), Basic Insulation Type, Inputs-To-Backplane, 125 V (Continuous), Basic Insulation Type, Input-To-Input, 1350 VAC For 2 SEC Routine Test, Power Rating: Backplane: 1.7 W, Enclosure: Open Type, Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2000 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 900 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 1890 MHZ, 3 V/M With 1 KHZ Sine-Wave 80% AM From 2000 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 80 MHZ, Display: Input, Communication Status And Module Health, Interface: Removable Terminal Block, Mounting: Chassis, Temperature Rating: 32 - 140 DEG F, Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Vibration: 2 G, Shock: 30 G(Operating), 50 G (Non-Operating), Response Time: Delay (Off To On): 10 MIC-SEC Nominal/20 MIC-SEC Maximum + Firmware Scan: Up to 25 MIC-SEC + Filter Time: 0 - 50 MS + ASIC Delay: 175 MIC-SEC (FIFO) Or 625 MIC-SEC (Co-ordinated System Time per point), Delay (On To Off): 25 MIC-SEC Nominal/50 MIC-SEC Maximum + Firmware Scan: Up to 25 MIC-SEC + Filter Time: 0 - 50 MS + ASIC Delay: 175 MIC-SEC (FIFO) Or 625 MIC-SEC (Co-ordinated System Time per point), Cyclic Update Time: 200 MIC-SEC - 750 MS, Timestamp: Plus/Minus 100 MIC-SEC, Power Dissipation: 5.5 W At 60 DEG C, Output Type: Current Sinking/Source, Impedance: Input: 10.8 KOHM At 55 VDC, Slot Width: 1, Surge Transient Immunity: Plus/Minus 1 KV Line-Line (DM) And Plus/Minus 2 KV Line-Earth (CM) On Signal Ports, Standard/Approvals: C/US UL listed, CSA certified, CE-ATEX, CE-EMC, CE-LVD, C-TICK, GOST_R, KCC certified, MARINE-ABS, MARINE-BVS, MARINE-DNV, MARINE-GL, MARINE-KRS, MARINE-LR, ROSTECHNADZOR, TUV-FS

• Item Name: Digital DC Input Module

• Sub Brand: ControlLogix®

• Number Of Channels: 16 (Isolated)

• Input: Operating Voltage: 10 - 55 VDC, Nominal: 24 VDC, Off-State Voltage: 5 V, Off-State Current: 1.5 MA, On-State Current: 2 MA At 9 VDC, On-State Current: 4.5 MA At 24 - 31 VDC, On-State Current: 5.1 MA At 48 - 55 VDC

• Voltage Rating: 24/48 VDC

• Current Rating: Drawn: 320 MA At 5.1 V, 2 MA At 24 V

• Isolation: 250 V (Continuous), Basic Insulation Type, Inputs-To-Backplane, 125 V (Continuous), Basic Insulation Type, Input-To-Input, 1350 VAC For 2 SEC Routine Test

• Power Rating: Backplane: 1.7 W

• Enclosure: Open Type

• Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 - 2000 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 900 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 1890 MHZ, 3 V/M With 1 KHZ Sine-Wave 80% AM From 2000 - 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ - 80 MHZ

• Display: Input, Communication Status And Module Health

• Interface: Removable Terminal Block

• Mounting: Chassis

• Temperature Rating: 32 - 140 DEG F

• Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Vibration: 2 G, Shock: 30 G(Operating), 50 G (Non-Operating)

• Response Time: Delay (Off To On): 10 MIC-SEC Nominal/20 MIC-SEC Maximum + Firmware Scan: Up to 25 MIC-SEC + Filter Time: 0 - 50 MS + ASIC Delay: 175 MIC-SEC (FIFO) Or 625 MIC-SEC (Co-ordinated System Time per point), Delay (On To Off): 25 MIC-SEC Nominal/50 MIC-SEC Maximum + Firmware Scan: Up to 25 MIC-SEC + Filter Time: 0 - 50 MS + ASIC Delay: 175 MIC-SEC (FIFO) Or 625 MIC-SEC (Co-ordinated System Time per point), Cyclic Update Time: 200 MIC-SEC - 750 MS, Timestamp: Plus/Minus 100 MIC-SEC

• Power Dissipation: 5.5 W At 60 DEG C

• Output Type: Current Sinking/Source

• Surge Transient Immunity: Plus/Minus 1 KV Line-Line (DM) And Plus/Minus 2 KV Line-Earth (CM) On Signal Ports

• Impedance: Input: 10.8 KOHM At 55 VDC

• Slot Width: 1

• Variety of voltage interface capabilities
• Isolated and nonisolated module types
• Point-level output fault states
• Direct-connect or rack-optimized communication
• Field-side diagnostics on select modules
• These modules have individually isolated inputs or outputs
• Standards: C/US UL listed, CSA certified, CE-ATEX, CE-EMC, CE-LVD, C-TICK, GOST_R, KCC certified, MARINE-ABS, MARINE-BVS, MARINE-DNV, MARINE-GL, MARINE-KRS, MARINE-LR, ROSTECHNADZOR, TUV-FS