Digital Interface Module CompactLogix™, field removable terminal block, 40-pin, 10..30VAC/DC, Allen-Bradley

CompactLogix™ Digital Interface Module With Field Removable Terminal Block, Amperage Rating: 2 A/Circuit, 12 A/Module, 2 MA Indicator Circuit, Voltage Rating: 10 - 30 VAC/VDC, Length: 8.27 IN, Width: 2.78 IN, Height: 3.27 IN, Connection Cables: 40-Pin, Indicator: LED, Temperature Rating: 0 - 60 DEG C, Environmental Conditions: 5 - 95% Non-Condensing Operating Relative Humidity, Recommended Terminal Block Screw Torque: Fixed Screw Style: 3.5 - 4.5 LB/IN, Removable Screw Style: 3.5 - 4.5 LB/IN, Wire Strip Length: Fixed Screw Style: 0.32 IN, Removable Screw Style: 0.28 IN, Removable Push-in Style: 0.39 IN, Terminal Block Wire Range: Fixed Screw Style: 22 - 12 AWG, Removable Screw Style: 22 - 12 AWG, Removable Push-in Style: 26 - 12 AWG, Standard/Approvals: C/US UL: hazardous locations, Class I Div 2 (all modules, except those with relays), groups A, B, C, and D, UL file number E10314, guide number: NRAG, C/US UL: ordinary locations, module with relays, UL file number E113724, guide number: NRAQ, factory mutual (FM): hazardous locations; Class I Di v 2, CE certification

• Item Name: Digital Interface Module With Field Removable Terminal Block

• Sub Brand: CompactLogix™

• Amperage Rating: 2 A/Circuit, 12 A/Module, 2 MA Indicator Circuit

• Voltage Rating: 10 - 30 VAC/VDC

• Length: 8.27 IN

• Width: 2.78 IN

• Height: 3.27 IN

• Connection Cables: 40-Pin

• Indicator: LED

• Temperature Rating: 0 - 60 DEG C

• Environmental Conditions: 5 - 95% Non-Condensing Operating Relative Humidity

• Wire Strip Length: Fixed Screw Style: 0.32 IN, Removable Screw Style: 0.28 IN, Removable Push-in Style: 0.39 IN

• Recommended Terminal Block Screw Torque: Fixed Screw Style: 3.5 - 4.5 LB/IN, Removable Screw Style: 3.5 - 4.5 LB/IN

• Terminal Block Wire Range: Fixed Screw Style: 22 - 12 AWG, Removable Screw Style: 22 - 12 AWG, Removable Push-in Style: 26 - 12 AWG

Select groups of standard, fused and relay digital 1492 wiring system modules (refer to Selection Tables) have field terminal blocks that can be removed (RTB). This RTB feature can provide easier wiring of field devices in a control cabinet where the IFM is located in a hard to reach area, or where hand-access is limited. It can also provide easier and faster replacement of a damaged or defective 1492 wiring system module. The removable plug portion of the RTB assembly has a screw at each end to securely fasten it to the RTB socket, which is mechanically secured to the module circuit board hand housing. Modules are shipped with the RTB socket, but without the removable plug(s). Plugs are available with screw style or push-in style terminals and must be ordered separately(two pieces per cat. no.). Refer to the selection tables for the particular PLC I/O system of interest to determine which modules are offered with field removable terminal blocks.

• 24 VAC/VDC LEDs for input modules
• No fuse clips
• Two per I/O connection
• Standards: C/US UL: hazardous locations, Class I Div 2 (all modules, except those with relays), groups A, B, C, and D, UL file number E10314, guide number: NRAG, C/US UL: ordinary locations, module with relays, UL file number E113724, guide number: NRAQ, factory mutual (FM): hazardous locations; Class I Di v 2, CE certification