|
|
|
|
Image is illustrative
|
Thermostat Devireg 330, -10..10°C w. floor sensor, 3.6kW 16A 230V, TS35, Devi Code:
140F1070
Cena
|
Availability:
7 days
|
Weight:
0.083 kg/pc
|
Volume:
0.0002 m3/pc
|
|
|
|
|
Thermostat Devireg 330, -10..10°C w. floor sensor, 3.6kW 16A 230V, TS35, Devi
Overview
The DEVIreg™ 330 is an electronic thermostat to be installed in electric cabinets with DIN rail
attachment. Used primarily for controlling a lower temperature range as by frost protection.
The thermostat must be installed via an all-pole disconnection switch and has a LED indicating
the current mode (heating, standby or fault).
To measure and control the desired temperature a wire sensor or an outdoor air sensor must
be used. The temperature setting can be adjusted with a scale from -10° C to +10°C.
Benefits:
- For DINrail mounting
- Low temperature area
- Low standby consumption
- LED indicator
Standard compliance:
- EN/IEC 60730-1 (general),
EN/IEC 60730-2-9 (thermostat)
|
|
Specification:
|
| Operation voltage: |
220 V- 240V~ 50/60 Hz |
| Standby power consumption: |
max. 0.25 W |
| Relay: |
|
| Resistive load: |
Max 16A / 3680W @ 230V |
| Inductive load: |
Cos Φ = 0.3 max. 1A |
| Sensing unit: |
NTC 15 kOhm at 25° C |
| Hysteresis: |
± 0.2° C |
| Ambient temperature: |
-10° C to +50° C |
| Lowering in economy periods: |
5° C |
| Temperature range: |
-10° C to +10° C |
| Cable specification max: |
1 x 4 mm2 or 2 x 2,5 mm2 |
| Ball pressure test temperature: |
75° C |
| Pollution degree: |
2 (domestic use) |
| Controller type: |
1 C |
| Storage temperature: |
-20° C to +65°C |
| IP class: |
20 |
| Protection class: |
Class II |
| Dimensions (H/W/D): |
85 mm x 36 mm x 58 mm |
| Weight: |
83 g |
|
|
|
|
|
