|
|
|
|
Image is illustrative
|
Panel Feed-through SACC-E-M12MS-4CON-M20/0.5, 1pcs/pck, Phoenix Code:
1408451
Cena
Manufacturer
:
|
Availability:
21 days
|
Weight:
0.036 kg/pc
|
Volume:
0.0003 m3/pc
|
|
|
|
|
Panel Feed-through SACC-E-M12MS-4CON-M20/0.5, 1pcs/pck, PhoenixDimensionsAmbient conditions
|
Ambient temperature (operation)
|
-25 °C ... 85 °C (Plug / socket)
|
|
|
-25 °C ... 85 °C (Plug / socket)
|
|
Degree of protection
|
IP67
|
|
|
IP69K
|
General
|
Note
|
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
|
|
Rated current at 40°C
|
4 A
|
|
Rated voltage
|
250 V
|
|
Rated surge voltage
|
2.5 kV
|
|
Number of positions
|
4
|
|
Insulation resistance
|
≥ 100 MΩ
|
|
Coding
|
A - standard
|
|
Standards/regulations
|
M12 connector IEC 61076-2-101
|
|
Overvoltage category
|
II
|
|
Degree of pollution
|
3
|
|
Connection method
|
Individual wires
|
|
Insertion/withdrawal cycles
|
> 100
|
|
Torque
|
3 Nm ... 4 Nm (Installation-side)
|
|
Mounting type
|
Front mounting M20 x 1,5
|
|
Thread type
|
M20 x 1,5
|
Material
|
Flammability rating according to UL 94
|
V0
|
|
Contact material
|
CuZn
|
|
Contact surface material
|
Au
|
|
Contact carrier material
|
PA 6.6
|
|
Material, knurls
|
Brass
|
|
Sealing material
|
FKM
|
Cable
|
Conductor cross section
|
0.34 mm²
|
|
AWG signal line
|
22
|
|
Conductor structure signal line
|
7x 0.25 mm
|
|
Core diameter including insulation
|
1.2 mm ±0.07 mm
|
|
Thickness, insulation
|
0.21 mm
|
|
Wire colors
|
brown, white, blue, black
|
|
Material conductor insulation
|
TPE
|
|
Conductor material
|
Tin-plated Cu litz wires
|
|
Standards/specifications
|
M12 connector IEC 61076-2-101
|
|
Insulation resistance
|
≥ 20 MΩ*km
|
|
Conductor resistance
|
≤ 57.6 mΩ/m
|
|
Nominal voltage, cable
|
300 V
|
|
Test voltage, cable
|
2000 V AC
|
|
Ambient temperature (operation)
|
-40 °C ... 85 °C (cable, fixed installation)
|
|
|
-25 °C ... 85 °C (Cable, flexible installation)
|
Standards and Regulations
|
Standards/specifications
|
M12 connector IEC 61076-2-101
|
|
Flammability rating according to UL 94
|
V0
|
|
Safety note
|
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
|
|
|
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
|
|
|
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
|
|
|
• The products are suitable for applications in plant, controller, and electrical device engineering.
|
|
|
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
|
|
|
• Assembled products may not be manipulated or improperly opened.
|
|
|
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
|
|
|
• When using the product in direct connection with third-party manufacturers, the user is responsible.
|
|
|
• For operating voltages > 50 V AC, conductive connector housings must be grounded
|
|
|
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
|
|
|
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
|
|
|
• Only use tools recommended by Phoenix Contact
|
|
|
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
|
|
|
• Ensure that the protective or functional ground has been properly connected.
|
|
|
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
|
|
|
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
|
|
Standards/specifications
|
M12 connector IEC 61076-2-101
|
Environmental Product Compliance
|
REACh SVHC
|
Lead 7439-92-1
|
|
China RoHS
|
Environmentally Friendly Use Period = 50 years
|
|
|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
|
ECLASS
| ECLASS 10.0.1 |
27440102
|
| ECLASS 11.0 |
27440102
|
| ECLASS 4.0 |
27140800
|
| ECLASS 4.1 |
27140800
|
| ECLASS 5.0 |
27143400
|
| ECLASS 5.1 |
27143400
|
| ECLASS 6.0 |
27279200
|
| ECLASS 7.0 |
27440103
|
| ECLASS 9.0 |
27440102
|
ETIM
| ETIM 3.0 |
EC002061
|
| ETIM 4.0 |
EC002062
|
| ETIM 6.0 |
EC002061
|
| ETIM 7.0 |
EC002635
|
UNSPSC
| UNSPSC 6.01 |
31251501
|
| UNSPSC 7.0901 |
31251501
|
| UNSPSC 11 |
31251501
|
| UNSPSC 12.01 |
31251501
|
| UNSPSC 13.2 |
39121413
|
| UNSPSC 18.0 |
39121413
|
| UNSPSC 19.0 |
39121413
|
| UNSPSC 20.0 |
39121413
|
| UNSPSC 21.0 |
39121413
|
|
|
File description
|
File type
|
Download link
|
|
|
|
|
|
|
|
|
|
