|
|
|
|
Image is illustrative
|
Inductive Sensor NCN12-18GM50-Z4-V1, M18, Sn 12mm, NO, Sf1kHz, LED, -25..75°C, nickel-plated brass, PBT, M124 pin, 3.5..30VDC, IP67, Pepperl+Fuchs Code:
128873
Cena (indicative)
Manufacturer
:
|
Availability:
21 days
|
Weight:
0.028 kg/pc
|
|
|
|
|
|
Inductive Sensor NCN12-18GM50-Z4-V1, M18, Sn 12mm, NO, Sf1kHz, LED, -25..75°C, nickel-plated brass?PBT, M124 pin, 3.5..30VDC, IP67, Pepperl+FuchsInductive sensor NCN12-18GM50-Z4-V1
- 12 mm non-flush
- 2-wire DC
- Increased operating distance
Datasheet excerpt: Technical data of NCN12-18GM50-Z4-V1
| General specifications |
| Switching function | Normally open (NO) |
| Output type | Two-wire |
| Rated operating distance | 12 mm |
| Installation | non-flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 9.1 mm |
| Reduction factor rAl | 0.5 |
| Reduction factor rCu | 0.45 |
| Reduction factor r304 | 0.75 |
| Reduction factor rBrass | 0.55 |
| Nominal ratings |
| Operating voltage | 3.5 ... 30 V |
| Switching frequency | 0 ... 1000 Hz |
| Hysteresis | typ. 3 % |
| Reverse polarity protection | reverse polarity-conductive |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 3.5 V |
| Temperature drift | ± 15% |
| Operating current | 2 ... 100 mA |
| Off-state current | typ. 0.8 mA |
| Switching state indicator | LED, yellow |
| Pre-fault indicator | LED, red |
| Stability control-switch point | 0,8 sr ... 0,9 sr |
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Mechanical specifications |
| Connection type | Connector M12 x 1 , 4-pin |
| Housing material | brass, nickel-plated |
| Sensing face | PBT |
| Housing diameter | 18 mm |
| Degree of protection | IP67 |
|
|
|
|
|
