|
|
|
Image is illustrative
|
Calibratable Temperature Measuring Transducer THERMASGARD® HFTM-I, 8 range (-40..150°C), 0point cor. (±10°K), output 4..20mA, Pt1000 cl.B, 2/3wire, -30..70°C, ss1.4571 V4A Ø6mm L50mm, cv 15..36VDC, IP65, S+S Regeltechnik Code:
1101-1152-0219-920
Cena
Manufacturer
:
|
Availability:
14 days
|
Weight:
0.216 kg/pc
|
|
|
|
|
|
Calibratable Temperature Measuring Transducer THERMASGARD® HFTM-I, 8 range (-40..150°C) ?0point cor. (±10°K), output 4..20mA, Pt1000 cl.B, 2/3wire, -30..70°C, ss1.4571 V4A Ø6mm L50mm, cv 15..36VDC, IP65, S+S RegeltechnikTHERMASGARD® HFTM-I
Item No. 1101-1152-0219-920
EAN 4 251325 600680
Calibratable temperature measuring transducer with sleeve sensor THERMASGARD® HFTM with eight switchable RPTM 1 measuring ranges, continuous output, without ⁄ with optional display (for indicating the actual temperature), terminal box enclosure made of impact-resistant plastic, enclosure cover with quick-locking screws. The temperature transmitter with remote sensor is used to detect temperatures in liquid and gaseous media e.g. if installed in an immersion sleeve or as a duct sensor. The sensors are factory-calibrated. Adjustment ⁄ fine adjustment by the user is possible (zero point offset is adjustable).
| Voltage supply |
15...36 V DC
depending on working resistance, residual ripple stabilised ± 0.3 V |
| Power consumption |
< 1,0 VA ⁄ 24 V DC
< 2,2 VA ⁄ 24 V AC
|
| Working resistance |
Ra(ohm) = (Ub -14 V) ⁄ 0.02 A for I variant
|
| Deviation of humidity |
± 0.2 K at +25 °C |
| Output |
4...20 mA |
| Sensor |
Pt1000, DIN EN 60751, class B |
| Connection type |
2- or 3-wire connection |
| Measuring ranges |
multi-range switching with 8 switchable measuring ranges,
see table (other ranges optional)
with manual zero point correction (± 10 K)
|
| Ambient temperature |
Measuring transducer –30...+70 °C |
| Protective tube (sensor sleeve) |
stainless steel, 1.4571, V4A, Ø = 6 mm,
nominal length (NL) = 50 mm
(other dimensions optional)
cable entry stamped (optional rolled)
|
| Electrical connection |
0.14 - 1.5 mm²
via terminal screws on circuit board
|
| Enclosure |
plastic, UV-stabilised,
material polyamide,
30 % glass-globe reinforced,
with quick-locking screws
(slotted ⁄ Phillips head - combination),
colour traffic white (similar to RAL 9016)
|
| Enclosure dimensions |
72 x 64 x 37,8 mm (Tyr 1) |
| Cable gland |
2x M 12 x 1.5 (Y-adapter); with strain relief,
exchangeable, max. inner diameter 6 mm
|
| Connection cable |
silicone, SiHF, 2 x 0.25 mm², KL = 1.5 m (other lengths and
range limits optional, e.g. PTFE leads up to +250 °C
or glass fibre with steel wire mesh up to +350°C)
|
| Permissible air humidity |
< 95 % r. H., non-precipitating air |
| Protection class |
III (according to EN 60 730) |
| Protection type |
IP 65 (according to EN 60 529) humidity-tight stamped
IP 68 (optional watertight compound-filled) rolled
IP 54 (optional glass fibre cable)
|
| Standards |
CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014 ⁄ 30 ⁄ EU
|
|
|
|
|
