|
|
|
|
Image is illustrative
|
Ultrasonic Sensor UC2000-30GM-IUR2-V15, range 80..2000mm, output 4..20mA, 0..10V, -25..70°C, LED, RS232, ss1.4305, PBT, M12x1 5-pin, 10..30VDC, IP65, Pepperl+Fuchs Code:
104093
Cena (indicative)
Manufacturer
:
|
Availability:
21 days
|
Weight:
0.17 kg/pc
|
|
|
|
|
|
Ultrasonic Sensor UC2000-30GM-IUR2-V15, range 80..2000mm, output 4..20mA?0..10V, -25..70°C, LED, RS232, ss1.4305?PBT, M12x1 5-pin, 10..30VDC, IP65, Pepperl+FuchsUltrasonic sensor UC2000-30GM-IUR2-V15
- Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000
- Analog current and voltage output
- Synchronization options
- Adjustable acoustic power and sensitivity
- Temperature compensation
Datasheet excerpt: Technical data of UC2000-30GM-IUR2-V15
| Product Description |
| Single head system |
| General specifications |
| Sensing range | 80 ... 2000 mm |
| Adjustment range | 120 ... 2000 mm |
| Dead band | 0 ... 80 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 180 kHz |
| Response delay | 65 ms minimum
195 ms factory setting |
| Indicators/operating means |
| LED green | solid: Power-on
flashing: Standby mode or program function object detected |
| LED yellow 1 | solid: object in evaluation range
flashing: program function |
| LED yellow 2 | solid: object in detection range
flashing: program function |
| LED red | solid: temperature/program plug not connected
flashing: fault or program function object not detected |
| Temperature/TEACH-IN connector | Temperature compensation , Evaluation range programming , output function setting |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| Power consumption | ≤ 900 mW |
| Interface |
| Interface type | RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit |
| Input/Output |
| Synchronization | bi-directional
0 level -UB...+1 V
1 level: +4 V...+UB
input impedance: > 12 KOhm
synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms |
| Synchronization frequency | |
| Common mode operation | max. 30 Hz |
| Multiplex operation | ≤ 30 Hz / n , n = number of sensors , n ≤ 5
|
| Output |
| Output type | 1 current output 4 ... 20 mA
1 voltage output 0 ... 10 V |
| Switch-on delay | < 150 ms |
| Resolution | evaluation range [mm]/4000, but ≥ 0.35 mm |
| Deviation of the characteristic curve | ≤ 0.2 % of full-scale value |
| Repeat accuracy | ≤ 0.1 % of full-scale value |
| Load impedance | current output: ≤ 500 Ohm
Voltage output: ≥ 1000 Ohm |
| Temperature influence | ≤ 2 % from full-scale value (with temperature compensation)
≤ 0.2 %/K (without temperature compensation) |
| Approvals and certificates |
| EAC conformity | TR CU 020/2011 |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Connection type | Connector M12 x 1 , 5-pin |
| Degree of protection | IP65 |
| Material | |
| Housing | stainless steel (1.4305 / AISI 303)
PBT plastic parts |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Mass | 170 g |
|
|
|
|
|
